LiveZilla Live Help

Kategorier

Varukorg

Inga produkter

0kr Frakt
0kr Totalt

Priser exkl. moms

Varukorg Till kassan

Nyhetsbrev

Cometi Amber 60/18/R

Cometi Amber 60/18/R Maximera

Innermått: 5900x3720x2600 mm

Luftflöde: 18.000 m3/timme

Lufthastighet: 0.23 m/sekund

Mer detaljer

Amber 60/18/R

Tillgänglig: Leveranstid 2 månader

143 000kr

Direktbetalning
FRAKTPRIS

Priser inkl. moms 25%

Fraktpris inklusive moms 25%

Amber är den minsta modellen som Cometi erbjuder. Den levereras med en framsida med två dörrar för enklare arbeten men kan leverras med 3 dörrar (som bilden visar) för att möjliggöra arbeten med bilar. Båset är 3720mm brett invändigt och kan levereras i tre olika längder, 5900, 6490 och 7080mm långt. Enhetens standardhöjd är 2600mm men den kan beställas med 2800 eller 3000mm takhöjd för att bättre upfylla era behov.

Characteristics in detail:

The layout          

The layout will be studied according to the needs and the available spaces of the customer.

 

Dimensions

Width: the spray booth mod. Amber has a useful fixed width of 3720 mm
Height: the spray booth mod. Amber has a useful standard height of 2600 mm, but on demand it can be supplied with useful height of 2800 or 3000 mm
Length: the spray booth mod. Amber can be supplied in three useful lengths which are 5900 mm, 6490 mm, or 7080 mm

 

Overall dimensions

The overall dimensions change according to the model chosen and to the power and exhaust unit models that will be assembled

 

Floor pit with masonry works

The standard booth is supplied with masonry works basement, with excavation works (at customer's charge) to be realized according to our drawings, with 15 grates dim. 920 x 1000 x 40 x 3 mm for floor pit dim. 2840 x 5030 mm, including metal dividing bars, under-grate trays with special flaps and paint-stop filter rolls.

 

Metal basement

The metal basement can be supplied as an option, in this case no excavation works are required. The raised metal basement has a height of 300 mm and is covered with 21 grates dim. 920 x 1000 x 40 x 3 mm and side chequered boards on the walking surface at the two sides of the grates. The basement comes with the metal dividing bars, under-grate trays with special flaps and paint-stop filter rolls. To allow the entrance of a car into the booth several options can be chosen: 2 external ramps 2000 x 500 mm, a fixed internal ramp 1730 mm one or a pneumatic one.

 

Il frontale

The frontal frame has a thickness of 80 mm and the shutters of 50 mm. It can be supplied with 2 doors with useful opening dimension of mm 2400 x 2570h, with 3 doors with useful opening dimension of mm 3000 x 2570h, or with 4 shutters with useful opening dimension of mm 3780 x 2570h. The doors are equipped with standard observation windows secured with rubber gaskets. The glasses are anti-breaking and laminated. The personnel service door can be supplied with springs locks or anti-panic crossbar handle. As an option all the front doors can be supplied of "deluxe" type with large observation windows of 2100x700mm and with metal frames matching the same colour of the spray booth trims

 

Side and rear walls

Thickness 55 mm type "sandwich" made with white pre-painted iron sheets with mineral inside, with special interlocking system with no screws and no welding points

 

Filtering ceiling

Manufactured with white pre-painted iron sheets with 3 rolls of ceiling filters 945 mm wide each one supported by white square horizontal bars. The total filtering surface changes according to the length of the booth itself

 

Plenum

Realised with insulated top and side roofs type "sandwich" thickness 35 mm with useful height 480 mm

 

Lighting system

10 or 12 light groups (according to the length of the booth) located on top corners oblique mounted at 45°. Each light group is equipped with 2 or 4 fl. tubes 30W controlled by 1 or 2 electronic ballasts and protected by safety laminated glass 6/7 mm and metal frame sealed with gasket. As an option one can choose additional lower light groups equipped with 2 or 4 fl. tubes 30W

 

Power unit




The power unit can have air capacities from 18.000 m3/h to 22.000 m3/h and consequently dimensions that go from 1500 x 1500 mm to 1600 x 1600 mm. each power unit is supplied with stainless steel heat exchanger AISI430 with indirect flame exchange with two levels of tube racks, equipped with 1 double intake scirocco belt-driven fan and electric motor with pulleys and belts. It is supplied with stainless steel chimney simple foil Ø 250 mm3 m. straight + T + cap. On the air intake duct is installed a special drawer with pocket pre-filters of easy maintenance. A suitable oil fired Riello burner is supplied with the standard model, but it can be supplied with a gas burner with its gas train on demand.

Air capacity : from 18.000 m3/h to 22.000 m3/h
Electric power : 5,5 KW or 7,5 KW
Thermal power : from 100.000 Kcal/h to 160.000 Kcal/h
Burner: oil or gas

 

Exhaust unit





The exhaust units can have air capacities from 20.000 m3/h to 24.000 m3/h and consequently dimensions that go from 1200 x 1200 mm to 1200 x 1600 mm. the exhaust units can have the following different configurations:

Series TV: Exhaust units with no filters (only blowing unit)
Series EM: Exhaust units with paint stop filters and "M" holders
Series ET: Exhaust units with pocket filters dim. 357 x 582 x 440h
Series EC: Exhaust units with sleeve filters dim. 260 x 260 x 1000h
Series EK: Exhaust units with special cartridge made up of sleeve filters dim. 260 x 260 x 1000h + active charcoal in cylinders
Air capacity: from 18.000 m3/h to 24.000 m3/h
Electric power: 5,5 KW or 7,5 KW

 

Control panel

Electro-mechanic with cabinet IP55 with digital process controller for full automatic control of working cycles, main switch with key, hour counter, buttons, lamps, fuses etc. On demand, it can be supplied with Magnehelic pressure gauge, with pressure regulator and step-by-step motor during the spraying cycle

 

Various options

Each spray booth can be equipped with other additional options as personnel side service door, parts hanging bar with rails, angle shelf etc.

 

Colours and trims

Each Cometi spray booth is made of white pre-painted iron sheets and is refinished with plastic-coated corners. The spray booth can be trimmed in various colours chosen according to the end user taste or to the colour of the body shop where the spray booth will be installed. The available colours are red, yellow, dark blue, light blue, green, grey. The external units and the basement are zinced but, as an option, they can be trimmed in the same colour of the other booth trims.

Your account





Forgot your password?